Reverse Polarity BNC	Prefix			MCX Connectors				MMCX Connectors
	RPBNC/jack	BU			MCX/m	XM			MMCX/m	YM
	RPBNC/jack-blkhd	BW			MCX/m rt angle	XQ			MMCX/m-rt angle	YQ
	RPBNC/plug	BL							MMCX/f	YF
									Reverse Polarity MMCX
									RPMMCX/plug-rt ang	YB
	N Connectors	Prefix			SMA Connectors				TNC Connectors
	N/f	NF			SMA/f	SF			TNC/f	TF
	N/f-blkhd	NI			SMA/f-blkhd	SI			TNC/f-blkhd	TI
	N/m	NM			SMA/m	SM			TNC/m	TM
	N/m-rt angle	NQ			SMA/m-rt angle	SQ			Reverse Polarity TNC
	Reverse Polarity N				Reverse Polarity SMA				RPTNC/jack	TU
	RPN/plug	NL			RPSMA/jack blkhd	SW			RPTNC/jack-blkhd	TW
	RPN/jack blkhd	NW			RPSMA/plug	SL			RPTNC/plug	TL
					RPSMA/plug rt angle	SB
	Lucent / MC Card				U.fl Connector
	WiLAN/plug-rt angle	WQ			(Hirose™, iPax, Mini PCI)
					U.fl/plug	U1

Manufacturers are constantly updating and adding wireless access points and client cards.  If you don't see a card or model listed please call

How to Configure & Order
1) Select coax from the table; note prefix (not all connectors fit all coax shown)

2) Select first connector; note prefix

3) Select second connector; note prefix

4) specify overall length of coax in inches.

EXAMPLE
100M-BLNF-12 = LMR100A; RPBNC/plug + N/female. Length: 12 inches.

Please Note
Per industry standard and Allcom convention, coax is cut to the length specified in the part number (called the undeveloped length) and the connectors are then attached. In most instances this yields an assembly with an overall connector-tip-to-connector-tip length slightly greater than the length of the coax itself. In those instances where tip-to-tip length is a critical dimension, Allcom will build assemblies to customer drawing. Please call for details and ordering instructions.

Please call for Pricing & Configuration Help 888.255.2755